When this check box is selected, the blank portion of the last page of your document is not fed through the printer. Select this check box when you want to save roll paper. When this check box is selected, the Print page frame check box is enabled. Select this mode when you want to print multi-page data as individual pages, rather than as continuous data. When this check box is selected, the Save roll paper check box is enabled. Select this mode when you want to print multi-page data as continuous data on the roll paper, rather than as individual pages. These features are not available when Sheet Feeder is selected. The Roll Paper Option settings are only available when Roll Paper is selected as the Paper Source setting. When Maximum is selected, make sure that the paper loaded in the sheet feeder is not curled. Before printing large jobs using this setting, print a single sheet to confirm quality. The print quality may decline at the edges of the printout when Maximum is selected as the Printable Area setting. To increase the printable area at the bottom edge from 14 mm to 3 mm, select Maximum. This feature is not available when Borderless or Roll Paper is selected. Standard and Maximum are only available when Sheet Feeder is selected.
Use this option in the Printable Area Box to adjust the total area available for printing when Sheet Feeder and Manual Feed Slot is selected as the Paper Source setting. Use this setting to reduce or enlarge the size of your image between 25% and 400%. For details, see Printing on both sides of the paper. Select the Folded Booklet check box to make single-fold booklets. Select the Double-Sided check box to print on both sides of the paper. To print close to the bottom of the page, select the Rotate by 180 degrees check box. Select Portrait (tall) or Landscape (wide) to change the orientation of your printout. Refer to the Cutting position adjustment with Automatic Roll Paper Cutter for more details about the cutting position adjustment.Īuto Cut is selectable after the cutter is attached and Roll Paper is selected as the Paper Source setting. Use the cutter after you attach it and adjust the cutting position. Normal Cut is selectable only when printing with Borderless selected. By cutting twice, an 18 mm slip of paper is left. In this mode, the space between images is extended and the paper is cut twice inside this space. If you have selected Paper-Saving Cut and are unhappy with the gap of the cutting position, select Normal Cut. However, the cutting position may shift slightly.
The paper is cut at the boundary between images (the boundary between pages). If the cutter is attached, you can select the types of cutting. We recommend printing a single sheet to check quality before printing large jobs. Print quality may decline in the top and bottom areas of the printout, or the area may be smeared when printing on media other than that listed above. Printing with this feature selected takes longer than for normal printing.īecause this feature enlarges the image to a size slightly larger than the paper size when Sheet Feeder is selected as the Paper Source setting, the portion of the image that extends beyond the edges of the paper will not be printed.
When using this feature with Roll Paper and Banner Mode is selected as the Roll Paper Option setting, you need to use your image-editing software to make the image 4 mm wider than the roll paper. If your application has margin settings, make sure they are set to zero before printing. Use of other media may result in smearing because the media may rub against the print head. This option is available only when printing with paper that is on the Paper size list.ĮPSON recommends the following media when using this feature: Enhanced Matte Paper. Select this to leave no margins on all four sides of the roll paper. This option is available only when printing with paper that is in the Paper size list. Select this to leave no margins on all four sides of the paper. Select this option when you're printing on paper loaded in the manual feed slot.Ĭheck this box when you want to print with no margins.
Select this option when you're printing on roll paper. Select this option when you're printing on paper loaded in the sheet feeder. Select the paper source you wish to use from the following selections:
If you want to define a custom paper size, see Defining a custom paper size. Select the paper size that you want to use. You can make the following settings in the Page Setup dialog box: In the Page Setup dialog box, you can change the paper size, specify the paper orientation, print on both sides of the paper, rotate your document by 180 degrees, reduce or enlarge your printout, and adjust the printable area.Ĭhoose Page Setup from the File menu of your application. Making settings in the Page Setup dialog box